Archive - Language RSS Feed

Sobre Nikodemo, capital riesgo, y WebTV

En primer lugar, y dado que sé cómo se siente Albert en éstos momentos, darle tódo mi ánimo en su nuevo proyecto, el WebSeries Festival. Por otro lado, no puedo quedarme al margen de la mucha tinta que se ha versado respecto al modelo de WebTV, el capital riesgo, y los emprendedores, tanto para bién como para mal. Yo mismo he experimentado el que te digan “no” en repetidas ocasiones, escuchar que el proyecto no está teniendo “tracción”, o que le faltan cosas. Como última consecuencia, el “no” repetitivo forzó la venta de Whisher en condiciones no demasiado óptimas (por mucho que lo intente maquillar mi ex-socio en su perfil de LinkedIn, aunque ésa es otra historia que no viene al caso).

Me apena decir adiós a series como Cálico Electrónico, que en sus inicios nos hizo contactar con Albert sobre la posibilidad de que nos creasen un video animado de introducción a Whisher – aunque al final no se hizo por cambios sustanciales en nuestra página web. El cierre de Nikodemo & Co. viene forzado por no encontrar financiación que pudiese sostener el proyecto, que todavía tenía resultados económicamente negativos – aunque positivos en cuanto al público y lo social. Albert se queja de la falta de “riesgo” en la ecuación “capital riesgo”, aunque quizás el primer error fue la elección de las fuentes de financiación. El capital riesgo (en adelante, VC, como en los contratos) puro, tal y como se entiende en el mundo de los emprendedores, es desgraciadamente muy escaso en España. Me vienen a la cabeza unos pocos fondos, como Nauta, Debaeque, Adara, o Perennius. Más abundantes son los “business angels”, que son como un VC pero sin un garrote tan gordo para cuando van mal las cosas. Por debajo de aquí tenemos ya a los innumerables fondos, créditos, ayudas, viveros, parques tecnológicos, y pseudo-VCs. Los más preocupantes son éstos últimos, ya que en los primeros casos las cosas están bién claras desde el principio. Cuando accedes a un préstamo tipo NEOTEC, los términos son claros:

La empresa devolverá la ayuda a CDTI según vaya generando cash-flow positivo. Para ello, la empresa se compromete a facilitar a CDTI anualmente las cuentas anuales cerradas. La cuota anual de devolución será de hasta un 20% del cash-flow positivo generado hasta la amortización total del crédito.

Es decir, no corres riesgo. Si la empresa no llega a afianzarse, no tienes que hipotecar o vender la casa e irte a vivir debajo de un puente para devolver préstamos. el CDTI también se blinda un poco en cuanto a su riesgo de esta forma:

CDTI anticipa a la empresa, a la firma del contrato que regula la ayuda NEOTEC, entre el 40 y el 60% de la ayuda aprobada. El resto se entregará a la empresa a la finalización y justificación técnica y económica del proyecto-plan de empresa aprobado.

Si tus cuentas no dan resultado, el CDTI habrá perdido un máximo del 60%, de a su vez el 70% del coste total del proyecto, que es lo que otorgan. Otros tipos de ayudas oficiales se rigen por términos similares, y se convierten en una buena opción de capital semilla. El único problema es el arduo proceso de solicitud y trámite, que en ocasiones, puede alargarse meses, demasiado para una startup. Para solucionar en parte este problema, han aparecido una serie de empresas que se dedican a asesorar a startups en el proceso, a cambio de cuotas mensuales y/o porcentajes del capital conseguido – también otro tema para tratar en otro momento.

(more…)

My PCB business card flashes its LEDs!

Finally, I received the new PCBs from the manufacturer, after the first batch were found to be defective on track continuity (possibly due to too aggressive etching). This is a short video showing how the first one I assembled and programmed works:

Sagem’s SIMFi – not so fast

There have been a ton of posts around Sagem Orga’s SIMFi, presented at the Mobile World Congress. In essence it claims to add WiFi circuitry and intelligence to a standard SIM card. Supposedly, it then creates a WiFi mini-hotspot that can be used by nearby devices to share the 3G connection on the phone bearing the SIMFi. By now you’re thinking “why is this guy so skeptical?”. Let me explain.

The need for speed

The SIM card that your mobile phone is wearing is defined by a set of standards, mostly by GSM 11.11 [PDF] and ETSI TS 102 221 [PDF]. The ISO/IEC 7816-3 standard also defines some of the commands and procedures used by SIM cards.

In essence, a slow-speed startup sequence is performed after the initial card reset, at a preset speed of 9600bps. Yes, bits per second – you may start to infer where I’m getting at. After this sequence, the host is free to clock the SIM card up to 10MHz, which at the defined baud rate of c3/327, C3 being the clock frequency, means it can achieve a top speed of 30581bps. Or 30kbps.

Now correct me if I’m wrong, but bog-standard 3G being offered at 3.6Mbps. Sagem claims they can deliver this to a WiFi chipset on the SIM card…over a 30kbps bus. Somehow, I don’t buy it – and maybe that’s why they wouldn’t show any actual SIMFi cards, and only performed demos on closed terminals. And I bet they used a Sagem phone, and not a Nokia 6110.

InterChip USB to the rescue

IC-USB is an addendum to USB forum’s USB 2.0 specification, which enables USB communication between embedded chipsets at high(ish) speeds, using low power, short distance links. Wikipedia cites the maximum link length at 10cm. Gemalto provides a presentation [PDF] that has some plain-language information on the new card format, and what it can do. Finally, this GSMA document [PDF] provides some background information on the implementation of advanced functionality into new-generation SIM cards. It talks about minimum bus speeds of 200kbps. For the purpose of IC-USB, high speed means 12Mbps, which is respectable for what SIMFi tries to achieve.

Contacts? We don’t need no stinkin’ contacts!

This is what a normal SIM card reader looks like (there are many variations), as found on all phones in the market today:

Note that it has six contacts. The new IC-USB and UICC-ME protocols call for eight contacts on the SIM card, in order to fully accommodate the bus requirements. To put it bluntly, this means that the SIMFi will NOT be compatible with any existing mobile phone, and will only be compatible with phones sporting the new card reader and IC-USB protocol. I imagine Sagem made a phone specifically to work with the SIMFi for demos, but the claims that “In practical terms, this means that you’re able to turn virtually any phone (or “classic handsets,” as the company calls them) into a WiFi hotspot” (Engadget) are wildly over-stated.

At the Mobile World Congress today

If you want to meet up, I will be at the Mobile World Congress today, and probably on Thursday & Friday too. You can ping me on Twitter or leave a comment. I’ll be bringing my new business card along, I guarantee you won’t get another one like it from anyone at the Congress! This is a preview, I’ll be posting the story and design behind it in a couple of days:

Twitter as a support channel works better than email

It’s amazing that three suggestions or bug reports I’ve had about three different companies have been quickly and satisfactorily solved, after tweeting about them. In the past, I’ve tried to email companies before, with much worse results. Usually, things didn’t move until an email to the CEO was sent. It’s nice that companies are listening to Twitter more and more, and taking action about what people say about them.

Page 2 of 2«12